Download  Print this page

Adjusting The Feed Home Position Sensor Position - Brother LH4-B800E Service Manual

Electronic lockstitch button holer.
Hide thumbs

Advertisement

4-2. Adjusting the feed home position sensor position

q
q
1. Turn on the power and set the sewing machine to the home position. Then press the RESET key to lower the
presser foot.
2. If the clearance between the feed arm support q and the linear bushing w is 2 mm, the following adjustment is
not necessary. If the clearance is not 2 mm, turn off the power.
3. Loosen the screw e and adjust the position of the feed sensor support plate r.
4. Repeat the procedure from step 1.
w
2 mm
w
e
r
LH4-B800E
4. Adjustment
4 - 3

Advertisement

Table of Contents

   Also See for Brother LH4-B800E

   Related Manuals for Brother LH4-B800E

Comments to this Manuals

Symbols: 0
Latest comments: