Desktop Mounting, With Hood (Option); Replacing The Mu-151C With The Mu-152 - Furuno MU-152 Operator's Manual

1. MOUNTING, WIRING
7. Press the top of the hood (15) assembly to fit the knobs M4 in the cutouts.
8. Fasten the knobs (4 places) to secure the hood (15) assembly in place.
1.6

Desktop Mounting, with Hood (Option)

You can attach a hood when desktop mounting the unit, using the hood assembly OP26-3 (option)
and the bracket assembly OP26-35 (option). See sections 1.4 and 1.5.
1. Follow steps 1 to 3 in section 1.4.
2. Follow steps 1 to 8 in section 1.5.
3. Follow steps 5 and 6 in section 1.4.
1.7

Replacing the MU-151C with the MU-152

There are two methods to replace an existing flush mounted MU-151C with the MU-152; fixed
from the front (requires the flush mount kit, available as an optional extra), or fixed from the rear.
We recommend the flush mounting fixed at front to hide the screw holes.
Fixing from the front
1. Use the flush mounting template (included with the optional kit) to broaden the cutout at the
mounting location.
2. Follow steps 2 to 6 in section 1.3.
Fixing from the rear
1. Referring to the outline drawing at the back of this manual, broaden the cutout at the mounting
location.
2. Follow steps 2 to 9 in section 1.2.
Press
Press
10