Desktop Mounting (Option) - Furuno MU-152 Operator's Manual

1. MOUNTING, WIRING
3. Attach the flush mounting panel (15) to the monitor unit from the rear with the washer head
screws (M4×10, 8 places, torque: 1.2 N•m). Do not confuse the top and bottom of the panel
and check that screw holes on the panel and unit are aligned.
Wide
4. Connect all cables at the back of the monitor unit. See section 1.8.
5. Fit the monitor unit assembly to the cutout.
6. Secure the monitor unit to the cutout with the self tapping screws (4 places).
Self tapping screw
1.4

Desktop Mounting (Option)

You can mount the monitor unit on a desktop, using the bracket assembly OP26-35 (option).
Mounting Bracket (15)
Bracket Support w/knobs
Self-Tapping Screw
Binding Head Screw
Narrow
Bracket Assembly OP26-35 (Code No.: 000-034-941)
Name
OP26-2-1
OP26-35-1
5×20
M4×10
Washer head screw
Flush mounting panel (15)
Type Code No.
001-080-820
001-497-480
000-162-608-10
000-172-165-10
6
Qty.
1
4
6