Furuno MU-152 Operator's Manual page 17

3. Attach the F-mount hood packing 15 to the top brim, the hood packing bottom 15 to the bottom
brim, and then attach the F-mount hood packing side 15 to the right and left sides of the mon-
itor unit from the rear side as shown the figure below.
F-mount hood packing side 15
Hood packing bottom 15
4. Follow steps 3 to 9 in section 1.2 to fit the monitor unit to the mounting location.
5. Loosely fix the knobs M4 (4 pcs.) to the hood fixing plates 15.
6. Slide the cutouts of the hood (15) assembly onto the knobs M4.
Hood (15) assembly
Knob M4 (4 pcs.)
Cutout (4 places)
9
1. MOUNTING, WIRING
F-mount hood packing 15
Hood fixing plate 15