Snmp - Intel True Scale Fabric 12000 Series Reference Manual

12000 Series CLI
2.5.10

SNMP

2.5.10.1 snmpCommunityConf
Configure the SNMP community strings.
Syntax
snmpCommunityConf [-r <readonly_comm_str>] [-w <read_write_comm_strstring>]
Options
-r <readonly_comm_str>
-w <read_write_comm_strstring>
Sample Output
-> snmpCommunityConf -r public
Read Only Community String Was Set To: public
Notes
If no options are entered the current SNMP read-only community string and read-write
community string is displayed. If options are entered then the corresponding
community string is changed. To disable an entry put in a set of double quotes (i.e. "")
as the community name.
2.5.10.2 snmpTargetAddr
Displays and allows the changing of the snmpTargetAddrTable entries.
Syntax
snmpTargetAddr [show | delete | add | edit] -n name [-a addr] [-p port] [-t
timeout] [-r retry_count] [-l tag_list] [-v parameters] [-s storage_type] [-i
status]
Options
– Displays the contents of the snmpTargetAddrTable.
show
– Adds a row to the snmpTargetAddrTable.
add
– Modifies an existing row in the snmpTargetAddrTable.
edit
delete
– Name. A unique name used to identify a row. Any name with a space (e.g. xxx
-n
v3) must be surrounded by double quotes (").
– Address. The target machine IP address in dotted decimal form.
-a
– Port. The target port to send traps and information.
-p
– Timeout. The time to wait for an information response.
-t
– Retry count. The number of re-send attempts for information.
-r
– Tag list. Indicates the traps and information that is sent.
-l
July 2015
Order Number: G91931004US
– A read-only community string.
– Removes an existing row of the snmpTargetAddrTable.
– A read/write community string.
True Scale Fabric Switches 12000 Series CLI
Reference Guide
117