Gui - Installation; Configuring The Lens - Barco HDX 4K User Manual

10. GUI – INSTALLATION
Overview of features
• Configuring the lens
• Orientation
• Warping
• Lamp illumination
10.1 Configuring the lens
What can be done?
Once a lens has been installed in the projector, you can fine-tune the projected image.
The following things can be configured possible:
• Correcting the lens zoom and focus.
• Shifting the lens position.
• High Contrast mode
How to configure the lens
1. In the main menu, select Installation → Lens.
Image 10-1
Installation menu — Lens Options
2. To change the focus and zoom, select Zoom focus.
Image 10-2
Lens menu, Focus & Zoom
3. Use the ▲ or ▼ key to zoom the lens in or out.
Use the ◄ or ► key to focus the lens to far or near.
Image 10-3
Zoom and focus adjustment
R5906070 HDX 4K 23/09/2016
10. GUI – Installation
63