Related Manuals for kincrome K8030
Summary of Contents for kincrome K8030
- Page 1 DEFLECTING BEAM TORQUE WRENCH DEFLECTING BEAM TORQUE WRENCH PROTECTIVE DUAL BLOW +/ 4% SLIDING INDICATION SCALE MOULD ACCURACY AUDIBLE CLICK & VISUAL CASE K8030, K8031, K8032, K8034 ED3 MARCH 2017...
- Page 2 4. A) Thumb Grip (K8032 Only) B) Handle Ball (K8032 Only) C) Finger Groove (Force Center) 5. Indicator Pin 1/4” K8032 6. Deflection Beam 7. Square Drive SPECIFICATIONS K8030 K8031 K8032 K8034 Drive Size: 1/2” Square Drive 3/8” Square Drive 1/4” Square Drive 3/4”...
- Page 3 DEFLECTING BEAM TORQUE WRENCH GENERAL SAFETY WARNINGS Please study these instructions carefully before attempting to operate this wrench. Never apply more torque than the maximum scale reading. This torque wrench is designed for manual tightening of thread fasteners only. DO NOT USE IT AS A NUT-BREAKER OR FOR ANY OTHER PURPOSE. Over torqued or defective fasteners and sockets may suddenly break.
-
Page 4: Spare Parts
Your new Kincrome Torque Wrench is calibrated at the factory in Taiwan, prior to shipping and a certificate of that calibration is supplied for your individually serialised torque wrench.