Related Manuals for kincrome K16031
Summary of Contents for kincrome K16031
- Page 1 PETROL POST HOLE DIGGER PETROL POST COMPACT LIGHT HOLE DIGGER WEIGHT HIGH INCLUDES STEEL 150MM TORQUE PERSON REDUCTION AUGER POWER DRIVE OPERATION HEAD GEARBOX K16031 ED2 Sept 15...
- Page 2 16. Choke Lever 17. Butterfly Handle Grips 18. Fuel Mixing Bottle 19. Tool Kit Model No: ............................K16031 Description: ..........................Petrol Post Hole Digger Engine Displacement ........................51. 7cc Rated Output Power: ........................1. 34kW Fuel tank (3) Capacity : ........................ 1. 2l Fuel Mixture: ..........................
- Page 3 PETROL POST HOLE DIGGER General Safety Warnings Save all warnings and instructions for future reference. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1) Work Area a) Keep work area clean and well lit.
- Page 4 PETROL POST HOLE DIGGER o) Always operate the machine with two hands. p) DO NOT ever use the Petrol Post Hole Digger for any other purpose than digging post holes. It is designed for this use and any other use may cause an injury. Your Petrol Post Hole Digger is a precision piece of power equipment, not a toy. Therefore, exercise extreme caution at all times.
- Page 5 PETROL POST HOLE DIGGER 7) Description of Symbols The following symbols could be shown on the tool: Read the instruction manual before use. Risk of Explosion Wear Ear Protection Wear Eye Protection Warning Wear Safety Gloves Wear sturdy non slip footwear Do not smoke or bring any fire near the fuel Surface Hot to Touch...
- Page 6 Mixture WARNING: Always use the markings noted as, 30:1 fuel to oil mixing ratio located on the side of the fuel mixing bottle (18) when mixing fuel for the K16031 Petrol Post Hole Digger. FUEL: UNLEADED RATIO...
- Page 7 PETROL POST HOLE DIGGER 10) Assembly Attaching an Digger to the Drive shaft 1) Detach the clasp from the locking pin (15) and remove from the drive shaft (10) (Fig1). 2) Align the hole located at the top of the Digger connection socket with the hole in the drive shaft (10). 3) Insert locking pin (15) through the Digger and drive shft (10) until fully seated.
- Page 8 PETROL POST HOLE DIGGER Hot Engine Start 1) Push ON/OFF switch (5) to the ON position (Fig 7). 2) Move Choke Lever (16) to “ ” (Fig 8). 3) With right hand push down on the throttle lock-off (7) (Fig 9a), squeeze the throttle (8) (Fig 9b), then with your left hand push and hold the throttle lock-on (9) (Fig 9c) button then release the release the throttle (8) (Fig 9b) and Throttle lock-off (7) (Fig 9a).
- Page 9 PETROL POST HOLE DIGGER 4) Apply Castrol Foam Air Filter Oil to the entire filter. 5) Remove excess oil. 6) Attach the filter and air cleaner cover to the engine. Spark Plug 1) Check spark plug every 50 hours of operation. 2) Disconnect the spark plug cap, and clean any debris around the spark plug area.
- Page 10 Clean or replace air filter. operation. Choke partially engaged. Turn OFF choke (16). Carburetor out of adjustment. Call Kincrome Customer Service. Engine is hard to start. Old/dirty fuel. Drain fuel and replace with fresh fuel. Spark plug wire loose. Make sure spark plug wire is securelly attached to spark plug.
- Page 11 You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details please visit www. kincrome. com. au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.
- Page 12 www.kincrome.com.au...