2. Always store your Torque Wrench in the protective blow mould case. 3. If your Kincrome Torque Wrench is dropped, knocked, even in the protective blow mould case, or any part replaced, the wrench must be immediately re-calibrated prior to next use.
Page 4
92.9 84.1 75.2 66.4 57.5 48.7 39.8 22.1 13.3 MICRO TORQUE WRENCH HOW TO USE YOUR TORQUE WRENCH (Continued) Insert The Square Drive Firmly On The Socket e Wrench When Using The Torque The Grip. Dual Scale. Wrench. Make sure the Torque Scale (4a or Make sure the Torque Scale (4a or ng (6) down and g (6) down and...
MICRO TORQUE WRENCH Make sure the Torque Scale (4a or Keep the Locking Ring (6) down and TIPS & TRICKS FOR YOUR MINI TORQUE WRENCH 4b) & Micro Scale (5) table indicates rotate the hande (7) to the required Make sure the Torque Scale (4a or Keep the Locking Ring (6) down and n the Locking Ring (6).
Kincrome Tools and Equipment recommend you have your torque wrench calibrated by a NATA approved calibration facility, every 12 months or 1,000 cycles. If your Kincrome Torque Wrench is dropped, knocked, even in the protective blow mould case, or any part replaced, the wrench must be immediately re-calibrated prior to next use.