1/2” DR IMPACT WRENCH HEAVY DUTY General Safety Warnings Save all warnings and instructions for future reference. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury. 1) Work Area a.
1/2” DR IMPACT WRENCH HEAVY DUTY 4) Service a. Tool service must be performed only by qualified repair personnel. b. When servicing a tool, use only identical replacement parts. Use only authorized parts. c. Use only the lubricants specified by the manufacturer. 5) Additional Safety Warnings a.
Figure A Note: If an automatic oiler system is not used, add a 4 to 5 drops of Kincrome Air Tool Oil to the air inlet before operation. Add 1-2 drops every hour for continual use. Attach an air hose to the compressor’s air outlet. Connect the air hose to the air inlet (1) of the tool. Other components, such as a quick connect fitting and quick connect coupler, will make operation more efficient, but are not required.
Disconnect the tool from the air supply holding it so the air inlet (1) faces up. Hold the trigger (3) down and put 4 to 5 drops of Kincrome Air Tool Oil in the air inlet (1). Holding the trigger (3) down helps circulate oil in the motor.
1/2” DR IMPACT WRENCH HEAVY DUTY 11) Parts Breakdown K13205 WE RESERVE THE RIGHT TO CHANGE SPARE PARTS WITHOUT NOTICE * INDICATES STOCKED SPARE PARTS...