Statistics; Parameter Settings - AEG AS-IR01 Installation Instructions Manual

30
In total there are 32 history records. Press " " and " " to review the history record and press "ESC" to exit. The
numbers displayed on the top right is the serial no. of the record. The numbers displayed in the second line show the
date when faults occurred and were settled. If the third line is highlighted in color, it means that fault is still occurring. If
not ,it means that the fault is solved.

5.4.3 Statistics

Press " " and " " in the main interface to select "Statistics", and then press "ENT" to view the parameters shown in
figure 20.
The below information can be viewed from the Statistics menu:
Statistics menu:
Content
Lifetime
Day statistics

5.4.4 Parameter settings

Press " " and " " in the main interface to select "Setup Menu", and then press "ENT" to view the parameters shown in
figure 21.
Parameters can be set in this interface.
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
S t a t i s t i c a l M e n u
L i f e t i m e
P a r t i a l
T o d a y
Figure 20: Statistic information
Total operation time, total power produced, total power saved, total CO
in lifetime
Total power produced, total power saved, peak power and total CO
current day
Table 17: Statistics menu
S e t u p M e n u
A d d r e s s
K e y p a d P W D
C a s h / p r i c e
Figure 21: Statistic information
L a s t 7 d a y s
L a s t M o n t h
L a s t 3 0 d a y s
Detailed
D a t e / T i m e
L a n g u a g e
S e t M o d e l
reduction
2
30
reduction in
2