Mechanical Installation; Installation Of Single-Phase Inverters - AEG AS-IR01 Installation Instructions Manual

19

3.3 Mechanical installation

As the installation place can be chosen among different construction materials, the inverter can be installed by different
mounting methods. Taking the typical installation environment as the example, the manual describes how to install the
inverter on concrete wall. Because of different product structure, the single-phase and three-phase inverter feature
different instillation modes.
The inverter should be mounted in a vertical position of 90°to the horizontal line as shown in figure 9.

3.3.1 Installation of single-phase inverters

Size of installation brackets:
AS-IR01-750 / AS-IR01-1000 / AS-IR01-1500 / AS-IR01-2000/ AS-IR01-3000
AS-IR01-4000 / AS-IR01-4600 / AS-IR01-5000 / AS-IR01-3000-2 /
AS-IR01-4000-2 / AS-IR01-4600-2 /AS-IR01-5000-2
Structure instruction of installation bracket:
1
2
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
3-Ø8
Figure 10: Installation bracket of AS-IR01 750 W to 3000 W inverters
4-Ø8
Figure 11: Installation bracket of AS-IR01 4000 W to 5000 W inverters and AS-IR01-2 inverter series
Model
Table 11: Size of installation brackets
No.
Table 12: Installation bracket structure
A
A
Installation hole Φ8
Hexagon assembling bolt
hole M4
Installation hole
A (mm)
195
260
Structure instruction
19