Monitoring Communication; Standard Communication - AEG AS-IR01 Installation Instructions Manual

40

6. Monitoring communication

This section describes the communication connection of inverter and the inverter's monitoring system (computers,
mobile devices etc).
The standard communication mode of AEG AS-IR01 and AS-IR01-2 series of grid-tied solar inverters is RS485. The RS485
port can communicate with computers and mobile devices.
The monitoring system is sketched in figure 31.

6.1 Standard communication

Pins on inverter
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
Figure 31: Inverter monitoring system
RS485
4
1
2 3
1 4
2 3
EXT
Figure 32 (left): RS485 pin on inverter
3 2 1
4
(right) Communicator connector
40