Adjusting Platen Guide L - Canon DADF-H1 Service Manual

3.2.8 Adjusting platen guide L

Platen guide L, if detached, would require
gap adjustment with the platen roller upon
reassembly.
1) Opening the ADF, loosen two platen
guide mounting screws [1].
2) Platen roller [2]‚ and Platen guide
with a gauge (dedicated too: 1.4 mm
gap) [4] inserted in the clearance be-
tween platen roller [2] and platen guide
L [3] by about 2 mm, tighten two
screws [1] with platen guide L [3]
pressed against the gauge.
COPYRIGHT © 2001 CANON INC.
[1]
2000 2000 2000 2000 CANON DADF-H1 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
F03-302-21
[3]
[1]
F03-302-22
[2]
[4]
3-23