Canon DADF-H1 Service Manual page 105

6 Adjustment
6.1 Adjusting the Height
1) Check to make sure that the copyboard
end on the pickup side is in firm contact
with the copyboard grass at both front
and rear when the DADF is closed.
2) If one side is not in contact, turn the ad-
justing screw [1] to adjust the height of
the left hinge.
* If the front is not in contact, tighten the
adjusting screw.
* If the rear is not in contact, loosen the
adjusting screw.
COPYRIGHT © 2001 CANON INC.
CHAPTER 4 MAINTENANCE AND INSPECTION
2000 2000 2000 2000 CANON DADF-H1 REV.0 MAR. 2001
F04-601-01
[1]
F04-601-02
4-11