Table of Contents
Advertisement
Figure 82. Removing the backplane
NOTE:
The images shown here are for representation only and the actual configuration of your system may vary.
Next step
Install the backplane.
Installing the backplane
The procedure to install the backplane is identical for all backplane configurations.
Prerequisite
Follow the safety guidelines listed in
Steps
1
Use the hooks on the system as guides to align the drive backplane.
2
Lower the drive backplane until the release tabs snap into place. If applicable, tighten the captive screws on the backplane.
Safety
instructions.
Installing and removing system components
115
Advertisement
Table of Contents
