Follett Horizon Elite series Installation Instructions Manual page 10

3.12
Dispenser diverter plate installation – CORNELIUS ED, DF and DB SERIES
ICE CHUTE
COVER
10-32 WASHER
Cornelius ED, DF and DB series only
These dispensers require the installation of an ice diverter at the dispenser opening.
• Disassemble chute assembly
• Discard factory restrictor plate
• Replace with alternate diverter plate (supplied)
3.13
Agitation adjustments –
These dispensers require modifications for compatibility with Chewblet ice. Agitation
times must be set to 1 second ON, 1 hour OFF and the ice restrictor plate must
be adjusted to the fully open position. See your beverage supplier for these
modifications.
10
GATE MOUNTING PLATE
ICE DIVERTER
ICE CHUTE
10-32 NUT
Cornelius IDC and Flavor Fusion
self-contained
STORAGE HOPPER
FLANGE EXTENDS INTO
STORAGE HOPPER
THROUGH GATE
OPENING
APPLY RTV TO THIS
SURFACE TO SEAL
TO HOPPER GATE
MOUNTING PLATE
GASKET
HARMONY • TOP-MOUNT