Follett Horizon Elite series Installation Instructions Manual page 16

7.9
Cooling lines and power
➋
➊
• Connect cooling water lines to ice
machine
(Water "Out" connects to water
➊
regulator.)
• Water valve is set at the factory. DO NOT
remove seal or adjust water valve
7.11
Power cord
• Position plate into opening and secure
with supplied screw
16
7.10
• Remove twist tie
• Carefully pass cord thru opening and plug
into wall outlet
• For HCE/HME units, install a suitable plug
➋
7.12
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW: for low-scale water
self-contained
Power cord
TDS switch
HARMONY • TOP-MOUNT
TDS
HIGH
CLEAN
LOW