Screen Calibration - Rand McNally TND 760 Fleet Edition User Manual

Exhibit 6.
Calibrate Screen

Screen Calibration

As soon as the TND 760 is running, calibrate your screen.
™
Re-calibrate from time to time, especially if the screen "slips"
when you touch it.
To calibrate your screen:
• Press and hold the Home button
Calibration starts once button is released.
• Tap the center of the crosshairs as they appear on the calibration
screen [Exhibit 6]. There are four total.
- Tap as close to the center of the crosshairs symbol (+) as possible.
- Use the same pressure you normally use when tapping the screen
- If you receive an error, try again.
NOTE: Do NOT press and hold fi nger on the center of the crosshairs.
Just tap.
Getting Started
for 10 seconds.
TND 760 Fleet Edition User's Guide
™
9