Getting Started; System Registration - Rand McNally TND 760 Fleet Edition User Manual

Getting Started

TND
™
Register TND
and powered on, the Registration screen should display. Enter
your truck number in the Truck # fi eld and tap Register.
Send test message. Select the Mail icon on the Home
Menu and tap Send. Type message subject and message
text and tap Send in the upper left hand corner. Make sure
message indicator changes from X to a green check mark.
Verify GPS. Select the SysInfo icon on the Home Menu.
Select Diagnostics, then the GPS tab. Verify GPS status is good
and that there are values in the Latitude and Longitude fi elds.
Verify J1708/1939 data. Drive the truck at least .2 miles.
Select the SysInfo icon on the Home Menu. Select the
Diagnostics, then the J-Bus tab. Verify that there is an odom-
eter value in the Engine Odometer fi eld. Then go back to the
menu and select the Stats icon, then the Driver Performance
tab. Verify there is a value in the Engine Odometer field on the
second line in the fi rst column.
4
TND 760 Fleet Edition User's Guide
™
760 Fleet Edition System Registration
760 Fleet Edition. Once system is installed
™

System Registration

The fi rst time you power up your TND
need to register your unit.
™ 760, you will