Screen Calibration - Rand McNally TND 765 User Manual

Getting Started
Calibrate Screen
2
3
8
TND 765 Fleet Edition User Manual
™
5
1
4

Screen Calibration

To calibrate your screen:
• Press and hold the Home button
Calibration starts once button is released.
• Tap the center of the crosshairs as they appear on the calibration screen.
There are five total.
- Tap as close to the center of the crosshairs symbol (+) as possible.
- Use the same pressure you normally use when tapping the screen.
- If you receive an error, try again.
NOTE: Do NOT press and hold finger on the center of the crosshairs.
Just tap.
for 5 seconds.