Screen Calibration - Rand McNally ND 760 Fleet Edition User Manual

Exhibit 6.
Calibrate Screen

Screen Calibration

As soon as the TND
Recalibrate from time to time, especially if the screen "slips"
when you touch it.
To calibrate your screen:
• Press and hold the Home button
Calibration starts once button is released.
• Tap the center of the crosshairs as they appear on the calibration
screen [Exhibit 6]. There are four total.
- Tap as close to the center of the crosshairs symbol (+) as possible.
- Use the same pressure you normally use when tapping the screen
- If you receive an error, try again.
Note: Do NOT press and hold finger on the center of the crosshairs.
Just tap.
For Sales Information Please Contact
RoadTrucker Inc
(www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
Getting Started
760 is running, calibrate your screen.
™
for 10 seconds.
TND 760 Fleet Edition User Manual
™
9