Conformity With European Directives; Requirements For Special Applications - Siemens SIWAREX JB Operating Instructions Manual

Safety information

2.2 Requirements for special applications

2.1.2

Conformity with European directives

The CE mark on the device is a sign of conformity with the following European directives:
Electromagnetic
compatibility EMC
2014/30/EU
Atmosphère explosible
ATEX
2014/34/EU
The applicable directives can be found in the EU conformity declaration of the specific
device.
See also
Certificates (Page 41)
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
2.2 Requirements for special applications
Due to the large number of possible applications, each detail of the described device
versions for each possible scenario during commissioning, operation, maintenance or
operation in systems cannot be considered in the instructions. If you need additional
information not covered by these instructions, contact your local Siemens office or company
representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and
development purposes.
10
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
Directive of the European Parliament and of the Council on the
harmonization of the laws of the Member States relating to elec-
tromagnetic compatibility
Directive of the European Parliament and of the Council on the
harmonization of the laws of the Member States relating to
equipment and protective systems intended for use in potential-
ly explosive atmospheres
Operating Instructions, 12/2017, A5E43011851-AA
SIWAREX JB