Safety Approval Markings And Safety Tips; Ce Conformity; Sil Conformity; Safety Instructions For Ex Areas - Siemens SITRANS LVL200S Operating Instructions Manual

For your safety
6
During the entire duration of use, the user is obliged to
determine the compliance of the required occupational safety
measures with the current valid rules and regulations and also
take note of new regulations.

2.5 Safety approval markings and safety tips

The safety approval markings and safety tips on the device
must be observed.

2.6 CE conformity

SITRANS LVL200S is in CE conformity with EMC (89/336/
EWG), fulfils NAMUR recommendation NE 21 and is in CE
conformity with LVD (73/23/EG).
Conformity has been judged according to the following
standards:
EMC:
l
- Emission EN 61326/A1: 1998 (class B)
Susceptibility EN 61326: 1997/A1:1998
-
LVD: EN 61010-1: 1993
l

2.7 SIL conformity

SITRANS LVL200S fulfills the requirements to functional
safety according to IEC 61508/IEC 61511. You find further
information in the Safety Manual "SITRANS LVL200".

2.8 Safety instructions for Ex areas

Please note the Ex-specific safety information for installation
and operation in Ex areas. These safety instructions are part of
the operating instructions manual and come with the Ex-
approved instruments.
SITRANS LVL200S l RELAY (DPDT)