Magtrol WB Series User Manual page 50

Eddy-current and magnetic powder dynamometers
Table of Contents

Advertisement

Chapter 1 – Introduction
Ordering Information
DynaMoMeter options
Industrial Version (IS)
Single WB and PB Dynamometers are also available in an
industrial version which includes bearing supports, but does
not provide a base plate, or torque and speed measurement.
Vertical Mounting (V)
Vertical Mounting is available on the Eddy-Current (WB)
Dynamometer only. The vertical version has an adapted
bearing fitting and its maximum speed is limited.
Speed Pickup (DG)
All models, including tandems, are equipped with a 60-bit
optical speed sensor. On PB Dynamometers, a 600-bit or
6000-bit speed pickup (encoder) is available as an option for
low speed applications.
Mechanical Rotor Blocking Device (MB)
A mechanical rotor blocking device, which allows locked rotor
testing, is available for the WB Dynamometer.
systeM options anD accessories
DESCRIPTION
High Speed Programmable Dynamometer Controller
Torque-Speed Conditioner (includes necessary cables)
Power Supply (includes necessary cables)
High Speed Single-Phase Power Analyzer
High Speed Three-Phase Power Analyzer
M-TEST 7 Motor Testing Software
Temperature Testing Hardware
Dynamometer Table for (with grooved table top) 1 & 2 WB/PB 15 Series Dynamometers
Water Cooling Kit for DES 411/121 Power Supply (for 2, 3 and 4 WB or 2 and 4 PB 15)
Transformer (24 VDC) for electromagnetic clutch of tandem dynamometers
Couplings, Thermostatic Sluice, Pressure Sensitive Switch
Water Cooling System for Brake
Calibration Weights
Due to the continual development of our products, we reserve the right to modify specifications without forewarning.
Magtrol inc
70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: magtrol@magtrol.com
DynaMoMeter MoDels
Eddy-Current
orDering inForMation
If one of the listed options is desired, please follow the
dynamometer model (see table above) with a dash and then
the appropriate suffix (as noted in parenthesis). For example,
a Model 1 PB 15 Powder Dynamometer with an optional
6000-bit speed pickup is a 1 PB 15 - DG - 6000.
Magtrol sa
Centre technologique Montena
1728 Rossens / Fribourg, Switzerland
Phone: +41 (0)26 407 3000
40
Fax: +41 (0)26 407 3001
E-mail: magtrol@magtrol.ch
Magtrol WB/PB Dynamometers
Powder
1 WB 15
1 PB 15
2 WB 15
2 PB 15
3 WB 15
4 PB 15
4 WB 15
1 pB 15 - Dg - 6000
Example:
Dynamometer Model
www.magtrol.com
Subsidiaries in:
Great Britain
Germany • France
China • India
Worldwide Network
of Sales Agents
WB/PB 15
Tandem
2 WB 15 + EK + 1 PB 15
2 WB 15 + EK + 2 PB 15
2 WB 15 + EK + 4 PB 15
4 WB 15 + EK + 1 PB 15
4 WB 15 + EK + 2 PB 15
4 WB 15 + EK + 4 PB 15
Option
MODEL / PART #
DSP7000
TSC 401/121
DES 411/121
6510e
6530
M-TEST 7
HW-TTEST
005476
234-311-900-011
234-311-920-011
On Request
On Request
On Request

Advertisement

Table of Contents
loading

Table of Contents