Magtrol WB Series User Manual page 28

Chapter 1 – Introduction
System Configurations
single DYnaMoMeter conFigurations
The Dynamometers can be complemented by various electronic modules such as the DES 411 Power Supply, TSC 401 Torque/
Speed Conditioner and DSP7000 High Speed Programmable Dynamometer Controller.
Magtrol also offers In-Line Torque Transducers, which employ a unique non-contact differential transformer torque measuring
technology providing extremely accurate torque and speed measurement with superior electrical noise immunity. For a dynamic,
high-precision system, the torque transducer can be mounted in line between the unit under test and the dynamometer.
tanDeM conFiguration
Magtrol offers Eddy-Current and Powder Dynamometers mounted in tandem. In tandem, the unique features of each type of
dynamometer brake are utilized, allowing the unit under test to be applied with nominal braking torque from zero speed to
maximum rotation. The Tandem Dynamometers are available on a number of WB/PB combinations.
Torque/Speed
DES Power Supply
2
DSP
TM Torque
Transducer
Powder Brake
Dynamometer (PB)
TSC 401
Conditioner
Torque
Excitation
7002
DSP
Dynamometer
Controller
Eddy-Current (WB)
OR Powder Brake (PB)
Dynamometer
TSC 401
Torque-Speed
Conditioner
Speed
Torque
Excitation
DES Power Supply
7001
Dynamometer Controller
PC
USB
Eddy-Current (WB)
OR Powder Brake (PB)
Dynamometer
TSC 401
Torque-Speed
Conditioner
Speed
Torque
Excitation
7002
DSP Dynamometer Controller
Eddy-Current Brake
Dynamometer (WB)
Clutch
(EK)
Speed
Transformer
Torque
Excitation
18
Magtrol WB/PB Dynamometers
M-TEST
DES Power Supply
PC
M-TEST
USB
TSC 401
Torque-Speed
Conditioner
DES Power Supply
PC
M-TEST
USB
M AGTROL
WB/PB 65