Table of Contents
Advertisement
Chapter 1 – Introduction
Ordering Information
DYnaMoMeter options
High Speed (HS)
For testing small/miniature high-speed motors, Magtrol offers
a WB 43 Eddy-Current Dynamometer with speed ranges up
to 65,000 rpm.
Industrial Version (IS)
Single WB and PB Dynamometers are also available in an
industrial version which includes bearing supports, but does
not provide a base plate, or torque and speed measurement.
Vertical Mounting (V)
Vertical Mounting is available on the Eddy-Current (WB)
Dynamometer only. The vertical version has an adapted
bearing fitting and its maximum speed is limited.
Speed Pickup (DG)
All models, including tandems, are equipped with a 30-bit
optical speed sensor. On PB Dynamometers, a 600-bit or
6000-bit speed pickup (encoder) is available as an option for
low speed applications.
sYsteM options anD accessories
DESCRIPTION
High Speed Programmable Dynamometer Controller
Torque-Speed Conditioner (includes necessary cables)
Power Supply (includes necessary cables)
High Speed Single-Phase Power Analyzer
High Speed Three-Phase Power Analyzer
M-TEST 7 Motor Testing Software
Temperature Testing Hardware
Dynamometer Table (with grooved table top)
Transformer (24 VDC) for electromagnetic clutch of tandem dynamometers
Couplings, Thermostatic Sluice, Pressure Sensitive Switch
Water Cooling System for Brake
Calibration Weights
Due to the continual development of our products, we reserve the right to modify specifications without forewarning.
Magtrol inc
70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: magtrol@magtrol.com
Mechanical Rotor Blocking Device (MB)
A mechanical rotor blocking device, which allows locked rotor
testing, is available for the WB Dynamometer.
DYnaMoMeter MoDels
Eddy-Current
orDering inForMation
If one of the listed options is desired, please follow the
dynamometer model (see table above) with a dash and then
the appropriate suffix (as noted in parenthesis). For example,
a Model 1 PB 43 Powder Dynamometer with an optional 600-
bit speed pickup is a 1 PB 43 - DG - 600.
Magtrol sa
Route de Montena, 77
1728 Rossens / Fribourg, Switzerland
Phone: +41 (0)26 407 3000
16
Fax: +41 (0)26 407 3001
E-mail: magtrol@magtrol.ch
Magtrol WB/PB Dynamometers
Powder
1 WB 43
1 PB 43
2 WB 43
2 PB 43
1 pB 43 - Dg - 600
Example:
Dynamometer Model
www.magtrol.com
Subsidiaries in:
Germany • France
China • India
Worldwide Network
of Sales Agents
WB/PB 43
Tandem
2 WB 43 + EK + 1 PB 43
2 WB 43 + EK + 2 PB 43
Option
MODEL / PART #
DSP7000
TSC 401/111
DES 410/111
6510e
6530
M-TEST 7
HW-TTEST
005449
234-311-920-011
On Request
On Request
On Request
Advertisement
Table of Contents
