Table of Contents
Advertisement
Reinstalling a system-board tray in a 2U chassis
To reinstall a system-board tray in a 2U chassis, complete the following steps:
1. Slide the system-board tray into the chassis until it stops and the release
2. Reconnect the cables on the front of the system-board tray.
3. Turn on the system-board tray (see "Turning on the system-board tray" on page
4. Make sure that the power-on LED on the system-board-tray operator panel is lit
If you have changed the configuration of the system-board tray, you might have to
update the server configuration through the BIOS Setup Utility program. See
"Updating the server configuration" on page 28 for additional information.
handles click into place.
14).
continuously, indicating that the system-board tray is receiving power and is
turned on.
Chapter 3. Installing optional devices
27
Advertisement
Table of Contents
