IBM iDataPlex dx320 6385 User Manual page 36

The following illustration shows the location of the DIMM slots on the dx320 system
board.
Microprocessor 2
connector
Microprocessor 1
connector
To install a DIMM in the system-board tray, complete the following steps.
1. Read the documentation that comes with the DIMM.
2. Locate the DIMM connectors on the system board (see "System-board
24
IBM iDataPlex dx320 User's Guide
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
connectors" on page 10). Determine the connectors into which you will install
the DIMMs.
SATA 0
SATA 1
SATA 2
SATA 3
SATA 4
Battery
connector