Download
Share
Print this page
IFM Electronic Efector 200 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. IFM Electronic Manuals
  4. Accessories
  5. Efector 200
  6. Operating instructions manual

IFM Electronic Efector 200 Operating Instructions Manual

Diffuse reflection sensor with background suppression
Hide thumbs Also See for Efector 200:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Operating instructions
Diffuse reflection sensor with
background suppression
UK
O6H2

Advertisement

loading

Related Manuals for IFM Electronic Efector 200

Summary of Contents for IFM Electronic Efector 200

  • Page 1 Operating instructions Diffuse reflection sensor with background suppression O6H2...

  • Page 2: Preliminary Note

    1 Preliminary note 1.1 Symbols used ► Instruction > Reaction, result […] Designation of pushbuttons, buttons or indications → Cross-reference Important note Non-compliance can result in malfunctions or interference. 2 Functions and features The diffuse reflection sensor detects objects and materials without contact and indicates their presence by a switching signal.

  • Page 3: Operating And Display Elements

    4 Operating and display elements 1: LED yellow - switching output active 2: Setting potentiometer „range“ 3: LED green - operation, stability indication 4: Selector „output function“ 4.1 Stability indication The green LED is lit when the supply voltage is applied and the sensor signal is stable.

  • Page 4: Electrical Connection

    5 Electrical connection The unit must be connected by a qualified electrician. ► The national and international regulations for the installation of electri- cal equipment must be adhered to. ► Ensure voltage supply to EN 50178. ► Disconnect power. ► Connect the unit as follows: 5.1 PNP Connector M12 pigtail Cable *...

  • Page 5: Operation

    6 Settings 6.1 Set the output function ► Setting D: dark-on mode ► Setting L: light-on mode 6.2 Set the range ► Increase range: turn the setting screw of the potentiometer clockwise. ► Decrease range: turn the setting screw of the potentiometer anti-clockwise. Objects that are beyond the set switch point are suppressed.

  • Page 6: Maintenance, Repair, Disposal

    8 Maintenance, repair, disposal ► Keep the lens of the sensor free from soiling. ► For cleaning do not use any solvents or cleaning agents which could damage the plastic parts. ► After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations.

This manual is also suitable for:

O6h2