Advantech HIT-W121 User Manual page 5

17. CLASSIFICATION:
- Supplied by Class I adapter
- No applied parts
- Continuous operation
- No AP or APG category
18. Follow national requirements to dispose of unit.
19. Maintenance: To properly maintain and clean the surfaces, use only approved
products or clean with a dry cloth.
20. Contact information:
No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114,
R.O.C
TEL: (02) 2792-7818
21.
22. This equipment is not to be used as a life support system.
23. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations must comply with the system standard IEC
60601-1-1. Anyone who connects additional equipment to the signal input part
or signal output part is configuring a medical system, and is therefore, responsi-
ble that the system complies with the requirements of the system standard IEC
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60XXX certified equipment out-
side of the patient environment. If in doubt, consult the technical services
department or your local representative.
24. A user must not allow SIP/SOPs and the patient to come into contact with one
another at the same time.
25. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Note! Attention, please thoroughly consult the accompanying documentation.
Caution! This product: HIT-W121 is only used with the qualified & certificated
power adapter listed below:
Medical: SINPRO ELECTRONICS CO LTD, model: MPU50-107, Output:
16-21Vdc, 50W max (SET UP19Vdc, 2.63A).
ITE: FSP GROUP INC, model: FSP065-RAB, Output: 19Vdc, 3.42A.
ITE: FSP GROUP INC, model: FSP040-RAB, Output: 19Vdc, 2.1A .
ISO 7010-M002 : Refer to instruction manual/booklet
IEC 60878 : Follow operating instructions or Consult instructions for use
Environmental protection
Follow national requirements to dispose of unit.
v HIT-W121 User Manual