Table of Contents
Advertisement
Figure 6 Parallel Port Connections
Now you need to find your port addresses for ports 1 and 2. Follow the procedure below.
1. Click on Window's Start button, right click on Computer (or My Computer for Windows XP), and select
Properties.
2. Near the top select the Device Manager. (For Windows XP click on the Hardware tab first.)
3. Expand the Ports (COM & LPT) to see all the parallel ports on your control. For all MachMotion controls PCI
ECP Parallel Ports (LPT2) and PCI ECP Parallel Ports (LPT3) are used for the Apollo I.
Figure 7 Parallel Ports
1. Double click on one of the ports and then select the Resource tab. The first number in the first line of the
range is your port address.
Advertisement
Table of Contents
