Masimo Pronto-7 Operator's Manual page 51

Pronto-7 Chapter 4: Operation
will obsolete any skipped test files. If test files are available in different
locations (one on the micro SD and one on the Internal Device Storage) the
Pronto-7 will only allow you to load the oldest files. After the oldest file is
loaded, then the next most recent spot check test file can be loaded.
To confirm that new tests have been downloaded to the sensor, the test count
in the upper-left corner of the screen should be automatically increased by the
number of tests downloaded.
EMR Connectivity
The Pronto-7 can wirelessly connect to compatible EMR systems, allowing
test results to be sent to onsite EMR systems automatically. EMR connectivity
is supported by Telcor and Apex. Contact your local Masimo sales
representative for available EMR system compatibility.
To enable this feature, Pronto-7 must be connected to a wireless network and
EMR Connectivity settings must be configured in the EMR Connectivity icon
as seen in the following image.
www.masimo.com 49 Masimo