Masimo Pronto-7 Operator's Manual page 44

Pronto-7
Accessing Multi Sensitivity Mode
In addition to accessing multi sensitivity mode from the main menu, it can also
be accessed directly from a Test Results screen upon completion of a spot
check test. To test in multi sensitivity mode upon successful completion of a
spot check test:
1. Tap the Multi icon to transition into multi test mode.
2. The Pronto-7 will direct you to complete the following steps:
•
Remove the sensor completely.
•
Reattach the sensor to the same finger and verify correct
positioning.
•
Tap Continue to conduct the second of three tests.
•
Repeat steps 2-3 for the final third test.
www.masimo.com
Chapter 4: Operation
42 Masimo