Table of Contents
Advertisement
Pronto-7
If motion is detected, a hand icon will appear at the bottom right side of the
screen. (If the motion is not stopped and Measure Through Low SIQ is not on,
the test may be incomplete, in some cases, a measurement can be displayed
despite low signal quality conditions). See Low Signal I.Q. (Low SIQ) on
page 3836.
Patient Motion Detected
Low SIQ Detected
After a complete test there will be a series of audible tones and the Test
Results screen will display.
www.masimo.com
Chapter 4: Operation
Patient Motion and
Low SIQ Detected
34
Masimo
Advertisement
Table of Contents
