Aa8 - ICP DAS USA I-7088 User Manual

2.15. $AA8

Description:
This command is used to read the configuration of the LED.
Syntax:
$AA8[CHKSUM](CR)
$ Delimiter character
AA The address of the module to be read (00 to FF)
8 The command to read the configuration of the LED
Response:
Valid Command:
InValid Command:
! Delimiter character for a valid command
? Delimiter character for an invalid command
(An invalid command is returned if the specified
channel is incorrect.)
AA The address of the responding module (00 to FF)
S 0~7: Shows the count of channels 0~7
8: Rotates the count of channels 0~7
9: Shows the host control
There will be no response if the command syntax is incorrect, there
is a communication error, or there is no module with the specified
address.
I-7088 and M-7088 User Manual, Rev: A1.2 7MH-026-A12
!AAS[CHKSUM](CR)
?AA[CHKSUM](CR)
51