Activate Your Wireless Account; Insert The Sim Card Into Holder, If Required - Multitech MultiModem rCell MTCBA-Xx-EN2 Series Quick Start Manual

Activate your Wireless Account

Please refer to the wireless account Activation Notice located with
your product and on the MultiModem CD. Choose the one for your
wireless network provider and follow the directions to activate your
account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The
phone number may simply be given to you by your wireless service
provider or it may be on the SIM card or both. Wireless provider
implementations may vary.
Note: If you need remote access to your MultiModem over the
internet for remote configuration, you need to ensure that your
wireless network provider has provisioned mobile terminated
data and fixed or dynamic public IP address inwhich they can
configure the network to redirect any incoming connection to
that predefined IP .
Insert the SIM Card into Holder, If
required
The MultiModem requires the power supply connection to begin
operation. It also requires a SIM card (Subscriber Identity Module)
to operate on a GSM network. To install the SIM, do the following:
1. Using a small Phillips screwdriver, remove the two SIM door
screws and remove the SIM door.
Note: When changing a SIM, ensure that power is removed
from the unit.
Multi-Tech Systems, Inc. Quick Start Guide
MultiModem rCell Intelligent Wireless Router
5