Setting Time And Date; Shutdown Caution - Multitech MultiModem rCell MTCBA-Xx-EN2 Series Quick Start Manual

MultiModem rCell Intelligent Wireless Router
PPP Authentication
Authentication Type –
authentication protocol you want to use to negotiate with the
remote peer. PAP, CHAP, or PAP-CHAP.
Default = PAP-CHAP
User Name –
remote peer).
Password –
remote peer).
Important Note About Submit and Save & Restart
Click the Submit button located at the bottom of most screens to
save any changes you make. Then you must click the Save &
Restart button in order for your settings to take effect. Save &
Restart does not have to be executed after each screen; you can
change and Submit several screens, and then click Save &
Restart. The Save & Restart button is located on the Menu bar.

Setting Time and Date

The date and time must be set using the Web Management
software. The time and date set in IP Setup will not be correct unless
the SNTP client is enabled and you have a live Internet connection.
See SNTP Client in User Guide for more details.

Shutdown Caution

Never unplug the power until after you have performed the Save &
Restart process when changing settings. If setup changes are not
properly saved before unplugging the power, data could be lost.
14
Click the button corresponding to the
Enter the PPP User Name (it authenticates the
Enter the PPP Password (it authenticates the
Multi-Tech Systems, Inc. Quick Start Guide