Power Supply Capacity Calculation Plan; Calculation Using Dcnm-Aps(2) Or Dcnm-Ps(2) - Bosch DICENTIS Hardware Installation Manual

22 en | System installation design and planning
4.3

Power supply capacity calculation plan

How to start
Notice!
It is advisable to use the power calculation tool. The calculation tool is on the DVD supplied
with the Audio processor and powering switch and is also part of the DICENTIS software
DCNM.iso file, which can be downloaded from the Bosch website at: https://
licensing.boschsecurity.com/software
Decide how to supply power to the DICENTIS devices:
–
–
If you want to use PoE Ethernet switches, continue with chapter Calculation using PoE
switches, page 24.
See also
–
–
4.3.1

Calculation using DCNM-APS(2) or DCNM-PS(2)

Notice!
If you want to use customized cables, or a more accurate power supply capacity calculation
plan is needed, you should use the power calculation tool.
To calculate the total power supply capacity:
1.
2.
3.
Device type
DCNM-D
DCNM-DSL
DCNM-DVT
DCNM-DE
DCNM-MMD
DCNM-MMD2
DCNM-IDESK
DCNM-IDESKVID
DCNM‑CB02-I
DCNM‑CB05-I
DCNM‑CB10-I
2018.09 | V1.8 |
Using the Audio processor and powering switch and one or more Powering switches.
Using one or more PoE Ethernet switches.
Calculation using DCNM-APS(2) or DCNM-PS(2), page 22
Installation material and tools, page 31
Count all DICENTIS devices.
Know the exact location where the devices are installed.
Count each system network cable of the same length.
Hardware Installation Manual
Power consumption (Watts)
3.10
3.60
3.70
5.00
11.30
12.00
15.00
18.00
1.19
2.43
4.50
DICENTIS
Bosch Security Systems B.V.