Bosch DICENTIS Hardware Installation Manual page 11

DICENTIS
8.
9.
Figure 3.2: Typical camera setup
A typical camera setup in a DICENTIS Conference System consists of:
1. H.264 encoder to encode the HD SDI video to H.264
2. HD-SDI switcher
3. Projector
4. Video camera (Onvif Profile-S compatible camera, Sony, Panasonic)
5. System server controller (PC)
6. L3 Ethernet switch
7. Audio processor and powering switch (DCNM-APS / DCNM-APS2)
8. DCNM-MMD2
Cables:
–
–
–
Bosch Security Systems B.V.
CAT‑5e Ethernet cable (minimum requirement).
Optional video camera (Onvif Profile-S compatible cameras, Sony IP cameras via CGI
commands, or Panasonic HD Integrated IP) + external power supply:
– Captures the image of a speaking participant.
Note: The Sony camera needs to be placed in a separate VLAN to avoid problems with the
multicast data.
Note: The Panasonic camera requires an external H.264 encoder if the SDI video needs to
be displayed on the multimedia devices (or in the Meeting Application).
Dotted line = HD-SDI (coax cable)
Black with arrow = Ethernet TCP/IP
Black straight line = DCNM-cable
Hardware Installation Manual
System installation overview | en
2018.09 | V1.8 |
11