Table of Contents
Advertisement
FMU Technical Manual
4.5 Wiring of the FPΣ FMU
The FPΣ-FMU has a screw terminal on its lower side to connect to function earth. Use the
following items for wiring.
Accessory terminal block
If additional connectors are needed, use the connector manufactured by Phoenix Contact.
No. of contacts
2
Suitable wire
No. of wires
1
NOTE
Either fixed or flexible wires can be used to connect the function earth.
Fixed wires with a diameter>0.14mm² and flexible wires with a wire end ferrule can be used.
Wiring method
CAUTION
•
When removing the wire's insulation, be careful not to scratch the core wire.
•
Do not twist the wires to connect them.
•
Do not solder the wires to connect them. The solder may break from
vibrations.
•
After wiring, make sure stress is not applied to the wire.
Phoenix Contact product ID
Model no.
MC 1.5/2-ST-3.5
Size
AWG 28-16
4.5 Wiring of the FPΣ FMU
Product no.
18 40 36 6
Cross-sectional area
0.14-1.5 mm²
31
Advertisement
Table of Contents
