Dhcp Configuration Of Tcp/Ip In Windows Nt4 - NETGEAR CG814W Reference Manual

Reference Manual for the Model CG814W Wireless Cable Modem Gateway

DHCP Configuration of TCP/IP in Windows NT4

Once you have installed the network card, you need to configure the TCP/IP environment for
Windows NT 4.0. Again, remember Cox only sets up TCP/IP dynamically (i.e., it uses DHCP to
obtain TCP/IP settings).
Following are the procedures you use to configure TCP/IP with DHCP in Windows NT 4.0.
• Choose Settings from the Start Menu, and then select Control Panel.
This will display Control Panel window.
• Double-click the Network icon in the
Control Panel window.
The Network panel will display.
• Select the Protocols tab to continue.
C-14 Preparing Your Network