NETGEAR CG814W Reference Manual page 33

:
Figure 3-2: Wireless Access List menu
The Access List displays a list of MAC addresses that will be allowed to connect to the gateway.
These PCs must also have the correct SSID and WEP settings. You can add MAC addresses to the
Access List by either selecting form the list of Connected Wireless Devices, or by manual entering
MAC addresses
To restrict access based on MAC addresses:
For your convenience, this menu displays a list of currently Connected Wireless Devices and
1.
their MAC addresses. Select a device from the list that you want to allow to access your
network.
If the desired PC does not appear in the list, you can manually enter the MAC address of the
2.
authorized PC.
The MAC address is usually printed on the wireless card.
Wireless Configuration
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
3-5