Dhcp Configuration Of Tcp/Ip In Windows 2000 - NETGEAR CG814W Reference Manual

Verify that the Obtain an IP address
automatically radio button is selected.
• Verify that Obtain DNS server address
automatically radio button is selected.
• Click the OK button.
This completes the DHCP configuration of
TCP/IP in Windows XP.
Repeat these steps for each PC with this
version of Windows on your network.

DHCP Configuration of TCP/IP in Windows 2000

Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, you may need to know how to do it manually. Remember, Cox
only sets up TCP/IP dynamically, (i.e., it uses DHCP to obtain TCP/IP settings). Following are the
steps to configure TCP/IP with DHCP for Windows 2000.
Preparing Your Network
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
C-11