NETGEAR CG814W Reference Manual page 27

For Dynamic IP, the Duration and time of Expiration of the IP address are shown. The IP
address is renewed automatically using DHCP.
Enter your Host Name and Domain Name.
c.
These parameters may be necessary to access your ISP's services such as mail or news
servers.
If your ISP does not provide a Host and Domain name, you can use the following
example: If your main e-mail account with your ISP is
your host name and
Select Dynamic or Static IP Address:
d.
If your service provider assigns your IP address automatically through DHCP, select
"Dynamic IP". If your service provider has assigned you a permanent, fixed (static) IP
address for your PC, select "Static IP".
If you select Static IP, enter the IP address that your ISP assigned. Also enter the Static IP
Mask (also known as netmask), Gateway IP address and Domain Name Server (DNS)
Address.
– The Gateway is the ISP's router to which your gateway will connect.
– A DNS server is a host on the Internet that translates Internet names (such as
www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP
address of one or two DNS servers to your gateway during login. If the ISP does not
transfer an address, you must obtain it from the ISP and enter it manually here. If you
enter an address here, you should reboot your PCs after configuring the gateway.
The CG814W Gateway Cable MAC address is for the built-in cable modem. The
e.
CG814W Gateway Device MAC address is for the built-in router. MAC cloning lets you
substitute a different MAC address for the CG814W Gateway's built-in router address.
Note: Some cable Internet companies will require you to notify them when you replace
the original cable modem or PC so that they can register the MAC address of one or both
of these devices.
• MAC cloning lets you substitute a different MAC address for the CG814W Gateway's
built-in router address.
The first time you log in to the CG814W Gateway, it automatically fills in the Cloned
MAC Address with the MAC address from the PC which is logged in to the CG814W
Gateway.
• Click Apply to accept these settings.
Connecting the Gateway to the Internet
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
as the domain name.
yyy.com
, then use
aaa@yyy.com
as
aaa
2-9