NETGEAR CG814W Reference Manual page 43

the gateway to temporarily forward port 113 to the PC that initiated the login.l
Figure 4-6: Port Triggering menu, with IRC example.
To configure Port Triggering:
In the Trigger Range, enter the outbound ports that will be monitored for activity. This will be
1.
the "trigger".
In the Target Range, enter the inbound ports that should be forwarded when the trigger occurs.
2.
Select the appropriate protocol: TCP, UDP or Both.
3.
Check the Enable box
4.
Click Apply
5.
To clear a Port Triggering rule, you can either remove the check from the Enable box, to
Protecting Your Network
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
4-9