NETGEAR CG814W Reference Manual page 53

From the Main Menu of the browser interface, under the Maintenance heading, select the
Diagnostics menu, shown in
Figure 5-5: Diagnostics menu
To perform a Ping test
In the Ping Target section, enter the IP address of the PC you would like to ping.
1.
If you would like to specify additional details, you can set the Ping Size, No. of Ping and Ping
2.
Interval.
Click Start Test.
3.
Click REFRESH to see the results of the Ping test.
4.
Managing Your Network
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
Figure 5-5.
5-9