NETGEAR CG814W Reference Manual page 23

Connect the gateway to you computer using the Ethernet cable included in the box from
your CG814W Gateway's LAN port (B) to the Ethernet adapter in your computer.
B
CG i l
Figure 2-2: Connect a PC to the gateway
The CG814W Gateway incorporates Auto Uplink
port will automatically sense whether the cable plugged into the port should have a
'normal' connection (e.g. connecting to a PC) or an 'uplink' connection (e.g. connecting to
a switch or hub). That port will then configure itself to the correct configuration. This
feature also eliminates the need to worry about crossover cables, as Auto Uplink will
accommodate either type of cable to make the right connection.
To connect your computer to the modem via USB involves installing the USB driver.Insert
d.
the CD which came with your gateway into the CD drive of your computer.
Note: The USB connection option is only available for Windows PCs. Also, Windows
95 does not support USB without special operating system upgrades and patches.
Install the USB driver.
– Connect the USB cable to your modem and plug in the AC power for the gateway.
– Use the USB cable to connect your computer to the gateway.
Connecting the Gateway to the Internet
Reference Manual for the Model CG814W Wireless Cable Modem Gateway
C bl d G
TM technology. Each LOCAL Ethernet
2-5