Table of Contents
Advertisement
Chassis Intrusion Connector
PTN
3460
The board supports the chassis intrusion detection function. Connect the chassis intrusion
sensor cable from the chassis to this connector. When the system's power is on and a chassis
intrusion occurred, an alarm will sound. When the system's power is off and a chassis intrusion
occurred, the alarm will sound only when the system restarts.
BIOS Setting
Configure the chassis intrusion detection function in the Advanced menu ("SIO NUVO-
TON6112D" submenu) of the BIOS. Refer to the chapter 3 for more information.
Chapter 2 Hardware Installation
Chapter 2
Signal
Ground
Chassis
Intrusion
1 2
PTN
3460
Expansion Slots
PTN
3460
M.2 M Key (support 2242/2280)
(PCIe/SATA 3.0)
M.2 Socket
The M.2 socket is the Next Generation Form Factor (NGFF) which is designed to support mul-
tiple modules and make the M.2 more suitable in application for solid-state storage.
Mini PCI Express Slot (opt.)
The Mini PCIe socket is used to install a Mini PCIe card. Mini PCIe card is a small form factor
PCIe card with the same signal protocol, electrical definitions, and configuration definitions as
the conventional PCIe.
25
Full-size Mini PCIe (PCIe2.0/USB2.0) (opt.)
PTN
M.2 E Key (support 2230)
3460
(PCIe/USB2.0)
www.dfi .com
Advertisement
Table of Contents
