I/O Connectors; Sata (Serial Ata) Connector; Sata (Serial Ata) Power Connector - DFI AL102 User Manual

I/O Connectors

SATA (Serial ATA) Connector

PTN
3460
Features
• 1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s (SATA 0)
• Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connector is used to connect Serial ATA device. Connect one end of the Serial
ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drive in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Chapter 2 Hardware Installation
SATA 3.0 6Gb/s
1
GND
TXP
TXN
GND
RXN
RXP
PTN
3460
GND
7
SATA 0
Chapter 2

SATA (Serial ATA) Power Connector

PTN
3460
The SATA power connectors supply power to the SATA drive. Connect one end of the provided
power cable to the SATA power connector and the other end to your storage device.
20
Ground
Ground
+5V
+12V
SATA
Power 0
4 1
PTN
3460
www.dfi .com